- Mikrofoni i Oprema
- Gitare / Bass
- Pojačala Gitarska
- Gudački Instrumenti
- Duvački Instrumenti
- Klaviri / Klavijature
- Štimeri i Metronomi
- Žice
- Stalci
- Kablovi
- Konektori
- Servis/Rezervni delovi
- LF HF Zvučnici
- Ozvučenja
- Konferencijska Oprema
- Multimedia
- Hi-Fi
- Studio
- Bubnjevi
- Boutique Oprema
Zvučne kutije
JBL EON 210P
by JBL- System Power Rating : 300 Watts (2 X 150 Stereo)
- Maximum SPL Output : 124 dB peak system output (pink noise)
- Net Weight of System : 33 lbs. (19 lbs. for unit with powered mixer, 14 lbs. for unit with storage pod)
- System Type : Powered mixer with 2 two-way bass-reflex enclosures Frequency Range (-10 dB) : 60 Hz - 20 kHz
- Frequency Response (±3 dB) : 75 Hz - 19 kHz
- AC input : 120 - 240 V 50/60 Hz, voltage selector switch sets operational range Amplifier Design : Crown® Class D Output Connector : 2 X 1/4” TS (unbalanced) amplifier outputs
- Input Connectors : 8 inputs (4 Mono Mic/Line, 2 X Stereo)
- Channels : 1-4 are XLR / 1/4” jack combo connectors, XLR is a mic level input, 1/4” is a line level input. 5-6, one pair of 1/4” balanced TRS jacks (stereo), and a pair of RCA jacks (stereo). 7-8 is a 3.5 mm stereo jack
- Input Impedance : Ch 1-4 Combo: XLR 3 K Ohms Balanced Ch 1-4 Combo: TRS 20 K Ohms Balanced Ch 5-6: TRS 25 K Ohms Balanced Ch 5-6: RCA 12 K Ohms Unbalanced Ch 7-8: 3.5 mm 30 K Ohms Unbalanced Phantom Power : 30 V Output Connectors :
- Monitor outputs: one pair of 1/4” balanced TRS jacks (stereo), and a pair of RCA jacks (stereo)
- Headphone output: one 3.5 mm stereo jack Signal Indicators Main Output LED Ladder : Limit: Red LED indicates limiter active condition
- Signal: Green LED indicates signal present Signal Indicators: Ch 1-4 : Peak LED: Green = signal present, Red = input overload
- EQ : Individual channel Bass and Treble controls, center detent, +/-6 dB cut and boost System Limiter : On Board DSP Limiting and Tuning LF
- Driver : 1 x JBL 328 H 250 mm (10 in) woofer HF Driver : 1 x JBL 2414H-1 37.5 mm (1.5” ) annular polymer diaphragm, neodymium compression driver
- Coverage Pattern : 100º x 60º nominal
- Crossover Frequency : 2 kHz
- Crossover Type : Passive network, 2nd order filters (-12 dB per octave) for high pass and low pass filters
- Enclosure : Polypropylene Suspension/ Mounting : 36 mm pole socket with stabilizing screw
- Handles : One on top Grille : Powder coated perforated steel
- Shipping Package (HxWxD) : 21.5” x 26” x 13.75” (546 mm x 660 mm x 349 mm)
139.948,00din.
121.422,00 din.
